高折光指数光学树脂的合成——相转移法合成不饱和硫醇酯单体的条件控制

采用正常的低温相转移催化（ＰＴＣ）和反滴碱溶液ＰＴＣ法分别合成了含硫双烯ＭＥＳＤＭＡ和单烯ＭＥＰＳＭＡ．１Ｈ ＮＭＲ分析证明ＭＥＳ中的杂质主要是由原料ＴＤＧ引入的．对含单个巯基的ＭＥＰＳ的正常ＰＴＣ酯化接枝双键，因存在巯基和不饱和双键的加成反应而导致失败．作者最终得到了折光指数在１６２５以上的ＭＥＳＤＭＡ／ＭＥＰＳＭＡ共聚物．     

1-(2-pyridylazo)-2-naphthol (PAN) as extractant in solid-liquid extraction of some trivalent rare earth elements

In the present paper, solid-liquid extraction behaviour of RE(III) (RE La, Ce, Pr, Nd, Sm, Gd, Dy and Yb) by the use of 1-(2-pyridylazo)-2-naphthol (PAN, HL) as an extractant in paraffin (m.p. 48 approximately 50 degrees) has been investigated at 80 +/- 0.07 degrees. The effect of equilibrium time, pH of aqueous phase, concentration of extractant in paraffin and solid diluent as well as buffer solution used on the extraction efficiency of RE(III) have been discussed. The extraction reaction is RE(3+) + 2HL(o) + Cl(-) <==> REL(2)Cl(o) + 2H(+).     

SrO—Al2O3—SiO2：Eu^3＋,Bi^3＋发光体的溶胶—凝胶法合成

制备无机固体材料大都采用高温固相反应,1971年Dislich报导了用溶胶-凝胶法制备多组份固体材料。近年来,有报导利用此法研制玻璃、玻璃陶瓷和陶瓷。我们在过去工作的基础上,合成了SrO-Al_2O_3-SiO_2:Eu~(3 ),Bi~(3 )发光体,研究了从凝胶至发光晶体的转变过程、Eu~(3 )和Bi~(3 )在SrO-Al_2O_3-SiO_2基质中的发光性质以及Bi~(3 )对 EU~(3 )的能量传递。     

妊娠中期孕妇头发微量元素观察

为了解妇女妊娠中期营养状况，对１９９６年产科门诊采集的杂结果进行回顾性分析，结果表明，孕中期妇女有５９．６４％存在宏量和微量元素缺乏，其中钙缺乏占首位，铁缺乏占第二位，锌缺乏占第三位，镁变化不大。缺钙严重程度与季节有关。提示孕中期应对孕妇给予膳食结构的调整，适时补充营养和钙，以满足母胎之需要，减少母儿并发症。     

可交联聚甲基丙烯酸甲酯的合成、表征及在阵列式波导光栅中的应用

合成了含环氧基团的可交联的甲基丙烯酸甲酯和甲基丙烯酸环氧丙酯的共聚物[Poly(MMA-co-GMA)],通过FTIR,NMR,GPC,DSC和AFM等技术对其进行了表征. 结果表明,所合成的聚合物材料具有较好的成膜性; 通过热固化使引入的环氧基团开环交联,该聚合物的玻璃化转变温度(Tg)比固化前提高了24 K,同时有效地降低了聚合物的双折射率. 用Poly(MMA-co-GMA)作为包层材料,双酚A型环氧化合物作为高折射率材料, 将其引入到包层材料中形成芯层材料的折射率在波长1.55 μm处可调,其范围是1.483~1.588. 采用旋涂、 铝掩膜和氧反应离子刻蚀的方法(RIE)制得了阵列式光波导. 测试结果表明,制作的波导在1.55 μm处实现了光的单模传输,光损小于3.0 dB/cm.      

液晶CPBOB吸附的STM研究

利用STM对吸附在导电基底上的液晶进行研究，能提供近原子分辨的液晶分子图象，这一创新不仅拓宽了STM的研究领域，也使STM成为研究液晶吸附的重要手段之一．根据液晶相变特征不同，样品的制备方法大致分四种情况：直接法，加热法，气相沉积法和溶剂法．无论采用以上哪种方法，     

COVALENTLY BONDING CHIRAL POLYURETHANE ON AMINATED SILICA GEL： A NEW STRATEGY TO PREPARE CHIRAL STATIONARY PHASE FOR HIGH PERFORMANCE LIQUID CHROMATOGRAPHY

Two polyurethanes of different molecular weights were prepared by the copolymerization of phenyl diisocyanate and diisopropyl tartrate. The polyurethanes having terminal isocyanate groups were reacted with 3-aminopropyl silica gel to afford two chiral stationary phases. The Mn of the two polyurethanes were 4057 g/mol and 6442 g/mol. The polyurethanes and the corresponding chiral stationary phases were characterized by FT-IR, 1H NMR and elemental analysis. The loading capacities of the polyurethanes on silica gel were 0.68 mmol units/g and 0.61 mmol units/g, respectively. The separation performance and the influence of additives, triethylamine and trichloroacetic acid, on the separation of chiral compounds were investigated by HPLC. The chiral stationary phase prepared from polyurethane with Mn of 4057 g/mol demonstrated better enantioseparation capability than that with Mn of 6442 g/mol. Additionally, it was found that the addition of triethylamine and trichloroacetic acid in the mobile phases significantly improved the enantioseparation for these two chiral stationary phases.     

Behaviors and mechanisms of copper adsorption on hydrolyzed polyacrylonitrile fibers

Polyacrylonitrile fiber (PANF) was hydrolyzed in a solution of sodium hydroxide and the hydrolyzed polyacrylonitrile fiber (HPANF) was used as an adsorbent to remove copper ions from aqueous solution. Scanning electron microscopy (SEM) showed that the hydrolysis process made the surface of HPANF rougher than that of PANF. Fourier transform infrared (FTIR) spectroscopy revealed that the HPANF contained conjugated imine (-Cz=Nz-) sequences. Batch adsorption results indicated that the HPANF was very effective in adsorbing copper, and the adsorption equilibrium could be reached within 10-20 min. Atomic force microscopy (AFM) showed that some aggregates formed on the surface of the HPANF after copper ion adsorption and the average surface roughness (R(a)) value of the HPANF changed from 0.363 to 3.763 nm due to copper adsorption. FTIR analysis indicated that copper adsorption caused a decrease of the light adsorption intensity of the imine (-Cz=Nz-) groups at 1573 and 1406 cm(-1) wavenumbers, and X-ray photoelectron spectroscopy (XPS) showed that the binding energy (BE) of some of the nitrogen atoms in the HPANF increased to a greater value due to copper adsorption. The FTIR and XPS results suggest that the adsorption of copper ions to the HPANF is attributed to the imine groups on the surface of the HPANF.     

CoCl_2·6H_2O or LaCl_3·7H_2O Catalyzed Biginelli Reaction. One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1 H)-ones

Ｉｎｔｒｏｄｕｃｔｉｏｎ1,4 Ｄｉｈｙｄｒｏｐｙｒｉｄｉｎｅｓｏｆｔｈｅｎｉｆｅｄｉｐｉｎｅｔｙｐｅ (ｅ .ｇ .Ｉ—ＩＩＩ)ａｒｅｔｈｅｍｏｓｔｓｔｕｄｉｅｄｃｌａｓｓｏｆｏｒｇａｎｉｃｃａｌｃｉｕｍｃｈａｎｎｅｌｍｅｄｉｃｉｎｅ ,ｗｈｉｃｈｈａｖｅｂｅｃｏｍｅａｌｍｏｓｔｉｎｄｉｓｐｅｎｓ ａｂｌｅｆｏｒｔｈｅｔｒｅａｔｍｅｎｔｏｆｃａｒｄｉｏｖａｓｃｕｌａｒｄｉｓｅａｓｅｓｓｕｃｈａｓｈｙｐｅｒｔｅｎｓｉｏｎ ,ｃａｒｄｉａｃａｒｒｈｙｔｈｍｉａｓ ,ｏｒａｎｇｉｎａ .1Ｉｎｔｈｅｐａｓｔｄｅｃａｄｅ…     

Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.